Exemplary Info About How To Check The Smps

Remove the connections that are connected to motherboard from smps.

How to check the smps. Connect the smps to 230vac and connect the appropriate load to check to working of smps. You can check with a piece of power code ( wire) or with multimeter. Remove the connections that are connected to motherboard from smps.

Measure the output voltage of smps by a multimeter( indicate the output voltage 12v or 24v. It is very easy to check smps problem. How to check smps/power supply unit is working or nothave you ever wondered how to start a smps without the motherboard.

The shown burnt smps can be repaired with the following simple steps. Use a paper clip and bend it in u shape. Locate the green and select any one of the black wire of the bigger.

Use which ever is available with you. Smps is the switched mode power supply circuit which is designed for obtaining the regulated dc output voltage from an unregulated dc or ac voltage. You can check with a piece of power code ( wire) or with a multimeter.

2) without any doubt you will find. Use whichever is available to you following two steps. It is straightforward to check the smps problem.

It might require to start the smps w. Locate the green and select any one of the black wire of the bigger. Figure 4 shows the noise measured using these three methods.

There are four main types of smps. Locate the green and select any one of the black wire of the bigger. Use a paper clip and bend it in u shape.

Use a paper clip and bend it in u shape. To do so, remove power cable form smps and unplug all connections of peripherals (hard disk motherboard, dvd etc.) because it will save the damaging of harddisk or motherboard if any.